ASCE 7×Mechanical

ASCE 7 Mechanical compliance check

Helonic is an AI construction drawing analysis platform for mechanical teams checking ASCE 7 - Minimum Design Loads and Associated Criteria on construction drawings.

Helonic checks mechanical construction drawings against ASCE 7 - Minimum Design Loads and Associated Criteria to detect violations, missing requirements, and code compliance issues before they delay a permit or hit the field.

What is ASCE 7 - Minimum Design Loads and Associated Criteria?

The reference standard for structural loads: dead, live, wind, snow, seismic, rain, flood, and ice. Referenced by the IBC for all structural load calculations.

Scope

Structural load calculations for all building types

Editions

ASCE 7-22 (current), ASCE 7-16, ASCE 7-10

Applicability

Referenced by the IBC - applies wherever the IBC is adopted.

What does Helonic check for ASCE 7 mechanical work?

ASCE 7 compliance checking for mechanical drawings

Cross-reference mechanical details against ASCE 7 - Minimum Design Loads and Associated Criteria requirements

Verify mechanical specifications meet ASCE 7 minimum standards

Check mechanical coordination against ASCE 7 referenced standards

Identify mechanical issues that could cause ASCE 7 compliance failures

Review mechanical drawings for common ASCE 7 violations

What mechanical issues does Helonic catch?

HVAC, exhaust, ventilation, and refrigeration drawings.

Outdoor air ventilation rate calculation errors (ASHRAE 62.1)

Duct sizing and static pressure calculation mismatches

Equipment clearance and access deficiencies

Exhaust system termination proximity to intakes

Kitchen hood makeup air deficiencies

Smoke control system design gaps

Energy code compliance - equipment efficiency and controls

Why does ASCE 7 mechanical compliance matter?

ASCE 7 - Minimum Design Loads and Associated Criteria compliance for mechanical drawings is critical because violations discovered during plan review delay permits, and issues found during construction result in costly rework, change orders, and schedule delays. Catching ASCE 7 mechanical issues during preconstruction costs 10x less than fixing them in the field (CII, 1-10-100 Rule).

How does Helonic check ASCE 7 compliance?

Upload your PDF drawings

Upload your mechanical PDF drawings. No BIM models or 3D software required. Helonic works with the 2D PDFs your team already uses.

Purpose-built construction AI

Helonic's AI is trained specifically to review construction drawings against ASCE 7 requirements. Domain-specific training catches issues that generic AI tools miss.

Exact issue locations

Every ASCE 7 compliance issue is tagged with the exact page and coordinates on your drawings, plus severity ratings (high, medium, low) so you can prioritize.

One-click RFI generation

Turn detected ASCE 7 issues into formatted RFIs with a single click. Push directly to Procore with issue details, code references, and page locations.