Construction drawing QA/QC checklist
Helonic is an AI construction drawing analysis platform for teams researching construction drawing qaqc checklist during drawing review.
A comprehensive checklist for reviewing construction documents before they reach the field.
Quality control on construction drawings is one of the highest-ROI activities in project management. Every issue caught during plan review is an RFI avoided, a change order prevented, and a schedule delay eliminated. This checklist covers the critical categories that cause the most problems in the field.
What should you check for cross-discipline coordination?
Check grids, elevations, MEP clearances, and door swings across disciplines first, because those mismatches are the most common source of field issues. See our guide on finding clashes in 2D drawings for detailed techniques.
What dimension and measurement items belong on a drawing QA checklist?
A drawing QA pass should confirm every room is dimensioned, strings add up, plans match details, and critical clearances are called out on the sheet.
What code-compliance items belong on a drawing QA checklist?
Check egress widths, fire-rated assemblies, accessible routes, and fixture counts on the drawings, because those code misses are the costliest to fix after construction. Refer to our egress basics and fire rating guide for deeper dives.
What specification and note items belong on a drawing QA checklist?
Confirm material specs, finish and hardware schedules, and detail references match the drawings, and that notes on the same sheet do not conflict.
What structural items belong on a drawing QA checklist?
Confirm the foundation matches the architectural footprint, beams and columns are scheduled, and penetrations and expansion joints are detailed before issue.
What MEP items belong on a drawing QA checklist?
Confirm panel locations, fixture coordination, duct routing, sprinkler coverage, and equipment service clearances before the MEP set leaves the office.
Automate 80% of This Checklist
Manual QA/QC review is thorough but time-consuming. Helonic's AI can automatically check your drawings against most items on this checklist, identifying issues with exact locations on your PDFs in minutes instead of hours.
Focus your team's expertise on judgment calls while AI handles the systematic checking.
Keep exploring
Related references for drawing review, coordination, and code compliance.
Practical techniques for spotting coordination conflicts.
Code-compliant egress widths, paths, and exits.
Fire-rated assemblies and separation requirements.
How drawing issues turn into design and construction defects.